connecting circuit breaker to OPPO 93 linear power module

Purchase circuit breaker (288-1355-ND) at www.digikey.com

That is 2 A one pole circuit breaker which runs at 120V/ 240 V AC.

Connect each side tab of circuit breaker as shown in picture.

That is one wire from AC socket goes directly to one tab of circuit breaker.

( Don’t connect wire at marked X in3 pin terminal of PCB . That wire should connect to the circuit breaker )

Cut the black wire which marked X in the red cricle of PCB. This wire should connect to the the other tab of circuit breaker.

Then it can bypass fuse which is far inferior to circuit breaker in regards of sonic and video performance.

Since the Circuit breaker is bulky, the best place isover the analog DA board. You can use glue gun.