for searching best quality video blu ray player

audio 와 Home theater 2016. 12. 25. 10:39
728x90

 The BD player with the highest image quality is known to be DENNON A1UD (or the same model, the Marantz 9004), but it has a lots of limitation in use, such as restricting the reproduction of the file on the hard disk.

 

One time before, I tried to buy this and tried to modify it for better performance. but it is not module type construction, so I gave up.

 

I heard Pioneer UDP LX-88 is quite good for picture quality so I baught and used it for about a week and compared it with existing my modified OPPO 105. However, I found out it is not better than modified OPPO 105. So I sold it to another person.

 

So, we made further modifications to supply all parts of OPPO 105 inside with the full linear clean power to make the maximum performance.

 

the existing modified OPPO 105 has the linear power supply module which supplies a 5V constant voltage power to main board , but small switching DC-DC power supply IC modules in main board makes 1.1V, 1.2V, and 3.3V which is required by the CPU etc. Noise is emitted to the peripheral circuitry, which adversely affects video and sound quality.

 

with this modification, This is completely removed and a pure linear constant voltage is supplied to all parts which has no high frequency noise component.

 

 

 

What's different from the last one is that the particles on the screen are more detailed. It looks like the screen is composed of very fine particles like flour. I can also feel the texture of the surface. For example, it appears in the skin tone of leather jackets and the gloss of metal. The luxuriousness of the dark yellow has come to an impression that I have never felt before.

 

However, this extra modification has unexpectedly improved in audio quality.

 

 

The audio system I use is a 3-way multi-amp system I builet myself.

The pre-amp and the 3-way channel divider are made with transistors and FETs .through this the audio signal is separated into mid, high, and bass frequencies , amplified by 6v6 PP tube power amp for the treble, 2A3 single tueb amp for the middle range, and FET power amplifier for the bass.

 

It is a structure to a 3-way speaker system using the unit of Hartsfield speaker units ,which was known of one of best JBL speaker systems . The sound quality is tuned to produce a deep, spacious, yet comfortable sound rather than modern analytic sounds.

 

Currently, the oppo 203 model which is 4K UHD is coming from United States, but as a result of examining the interior, it seems that it is going to have a slightly unsatisfactory structure compared to Oppo 103 (D) or 105 (D). If you do not really need 4K video, it would be better to just settle in the Oppo 10X series. Especially if you are concerned on audio performance.

 

For reference, the ultimate full linear modification is possible only with Oppo 103 model. The Oppo 103D has Darbee circuitry and the power supply on the main board has changed a bit. Currently, about 9 units are being used in this way with a fully pulled linear power supply, an OCXO clock and a stereo DAC board with a newly built ESS9018 chip.

------------------------------------------------------------------------------


HD DLP 소자 3 매를 사용한 3 판식 프로젝터 Runco LS 12D 모델 프로젝터를 설치한 이우 이에 상응하는 최고의 화질을 내는 블루레이 플레이어를 찾는 노력을 계속하는 중입니다.

 

최고의 화질을 내는 플레이어는 DENNON A1UD ( 또는 실제로 같은 기종인 마란쯔 9004 ) 라고 하는데 별 이견이 없는 것 같습니다. 다만 발매된지가 오래 되었고 하드 디스크에 있는 파일 재생 제한 등 제가 목적하는 바로 사용에는 너무 제약이 많은 것 같아 아쉽습니다.

한 때는 이것을 구입해서 보다 더 나은 성능을 위해 개조 해 볼까 내부 사진을 구해 곰곰히 들여다 보아도 모듈식이 아닌데다 기본적 완성도가 높아 더 이상 손 대 볼 데가 없는 것으로 결론 지었습니다.

 

지난번 포스팅 한 것 처럼 DENNON A1UD 다음으로 화질이 좋다는 말을 듣고 파이오니아 UDP LX-88을 구해서 약 1 주일 정도 기존에 갖고 있던 오포 105 개조 기기와 비교 해 보았으나 오포 105 개조 기기의 화질이 더 마음에 들어 다른분에게 양도 한 후 다시 궁리를 시작하였습니다.

 

앞으로 DENNON A1UD 이상의 궁극적인 화질에 사용성도 편리한 기기를 데논이나 파이오니아에서 나올 가능성은 거의 없을 것 같아 방법을 달리하여 오포 105 개조 기기를 추가로 개조 해서 최고의 성능을 낼 수 있도록 했습니다. 기존 개조 부분에다 더하여 오포 기기의 모든 부분을 풀 리니어 전원으로 공급하는 방식으로 추가 개조를 했습니다.

 

가가는 전원부 모듈이 리니어 방식으로 5V 정전압 전원을 공급하지만 이 것이 다시 메인 기판으로 들어 오면 메인 기판에서 필요한 CPU 전원 등으로 1.1V, 1.2V, 3.3V 으로 다시 변환 되는 과정에서 DC-DC 스위칭 동작 IC들에 의해 주변 회로에 고주파 노이즈를 방출 하여 화면 및 음질에 악영향을 줍니다. 이것을 완전히 제거하여 모든 부분에 리니어 정전압 회로에 의해 고주파 노이즈 성분이 없는 순수한 전원을 공급하는 방식입니다.

 

그러자면 전원 트랜스포머 부터 다시 설계하고 상당 부분을 다시 만들어야 합니다. 다행히 오포 103 용으로 수요가 있어 만들어 놓았던 PCB 등을 이용하여 이번에 완성하였습니다.

 

제가 혼자 사용하는 케이스가 없는 오포 105 기판에다 설치해서 외관은 볼품 없지만 성능은 또 한번 도약을 했습니다.

 

지난번과 달라진 점으로는 화면의 입자가 더욱 세밀해 졌습니다. 밀가루와 같이 아주 고운 입자들로 화면이 구성된 것 처럼 보입니다. 또한 표면의 질감을 잘 느낄 수 있습니다. 예를 들어 가죽 재킷의 번들 거림과 금속의 광택 등에서 잘 나타 납니다.‘

 

색채 표현력도 작으나마 더 순수하게 표현하는 것 같습니다. 짙은 노란색의 그 고급스러움은 지금까지 느껴 보지 못한 감동으로 다가왔습니다.

 

그런데 이번 개조은 예상외로 오디오 적인 면에서 더욱 더 확실한 개선 효과를 가져 왔습니다.

 

오디오쪽은 정말 알수가 없는 미묘한 부분이 정말 많은 것 같습니다.

 

사용하는 오디오 시스템은 제가 만든 3 웨이 멀티 앰프 시스템입니다.

트랜지스터와 FET를 사용한 프리앰프와 3 웨이 채널 디바이더에 중음, 고음 ,저음으로 분리되어 각각 고음은 6v6 PP, 중음은 2A3 single, 저음은 FET 파워 앰프로 가서 증폭 되어

JBL의 최고 명기 였던 Hartsfield 스피커의 유니트를 사용한 혼형 3웨이 스피커 시스템으로 가는 구조입니다. 음질 성향은 현대의 분석적인 음 보다는 깊고 넓으면서도 편안한 소리를 내도록 튜닝 되었습니다.

 

 

현재 4K UHD가 되는 oppo 203 모델이 미국에서 배송 대행으로 오는 중이지만 내부를 살펴 본 결과 오포 103(D)이나, 105(D)에 다소 아쉬운 구조로 가는 것 같아 기대를 하지 않고 있습니다. 오디오 적이나 4K 영상을 꼭 필요로 하지 않는 경우는 그냥 오포 10X 계열에 안주 하는 것이 더 좋을 것 같습니다. 특히 오디오 쪽의 성능을 중시하는 경우는 더 그렇습니다.

 

참고로 위와 같은 궁극적인 풀 리니어 개조는 오포 103 모델만이 가능합니다. 오포103DDarbee 회로가 들어가 메인 기판에 전원 공급 부분이 다소 바뀌어서 입니다. 현재 9대 정도가 이런 방식으로 완전 풀 리니어화 된 전원 공급과 OCXO 클럭 및 새로이 제작된 ESS9018 칩을 사용한 스테레오 DAC 기판이 장착되어 개조되어 사용 중입니다.

 

 

 

 

--------------------

I reently installed the state of art 3 DLP Runco LS 12D model projector( 3D).