OPPO 205 용 Femto clock

BD player Mod. 2018. 3. 13. 12:28
728x90

OPPO 205에는 주요 클럭이 시스템 클럭 27MHz와 DAC 보드에 있는 100Mhz 클럭이 입니다.


이 2 클럭 중 27MHz는 이미 오포 203에서 사용하여 그 파형의 정확함을 확인 한바 있습니다만 

이번에는 100Mhz 클럭의 개조 전 후 파형을 비교 해 보았습니다. 


개조전의 오리지널 클럭에 의한 파형입니다. 톱니바퀴 모양에다 Jitter ( 사각형으로 표시)도 상당 부분

있는 것이 보입니다.



개조 후의 사진입니다. 거의 정확한 구형파에다 Jitter도 실제적으로 존재 하지 않음을 보여 줍니다.



개조 후의 잠시 들어 보았습니다. 아직 에이징이 되지 않은 상태에서도 확연한 음질 차이를 보여줍니다.


물론 리니어 전원 고급형과 같이 사용해서도 기인 하겠지만 저음이 한 옥타브 정도 더 내려간 듯 느껴집니다.  놀라운 것은 저음의 정확성입니다. 끊고 맺음이 정확하게 들려 옵니다.


또 각 악기의 음상과 정위감이 발군의 실력을 보여 줍니다. 디지털 소스, 특히 DSD 파일이나 고음질 파일의 경우 더 현격한 차이를 들려 주었습니다.


아마 현존하는 오포 개조에 있어 이 같이 정확한 파형은 이 Femto clock 이 최고 인것  같습니다.


특히 주파수가 높을 수록 정확한 파형을 내기 힘든데 이 클럭은 고 임피던스 버퍼 회로를 각 클럭 바로 앞에 위치하여 설치함으로서 정확한 파형을 유지하면서 전달 할 수 있게 하기 때문입니다. 



참고로 밑은 시스템 클럭 27Mhz와 유사한 OP{PO 203 용 25  Mhz ( BD ROM Drive 용) 의 파형입니다.

시스템 클럭인 27Mhz는 기판 밑면에 있어 측정하기 어려워 대신 유사한 25Mhz의 파형을 보여드립니다.



개조 전 ( 25 Mhz origianal)


  개조 후  ( 25 Mhz  femto clock with buffer circuit)


Femto clock main board 

100 Mhz clock buffer in front of DAC ESS9038pro chip



------------------------------------------



The OPPO 205 has a main clock of 27 MHz as system clock and a 100 MHz clock on the DAC board. 


Of these two clocks, 27MHz has already been used in Oppo 203 to confirm the correctness of the waveform


This time, I compared waveforms before and after tweak of 100Mhz clock.






It is waveform by original clock before tweak. considerable amount of Jitter (indicated by a square) is shown



In the photo of after tweak. It shows that there is practically no Jitter  and wave shape is almost perfect retangular.



After r tweak. It shows a distinct sound quality difference even when it is not yet fully aged.




With the Linear Power supply, the bass sounds more like one  octave deeper. The surprise is the bass accuracy. 

In addition, the sound and position of each musical  instrument shows exact and outstanding performance. Digital sources, especially DSD files and high-resolution PCM files, made a big difference.


Especially, the higher the frequency, the harder it is to get the correct waveform,.


But thanks to the buffer circuit is placed in front of each clock input,  it can be transmitted with maintaining accurate waveform.



For reference, this is a waveform of 25 MHz (for BD ROM Drive) 

The system clock, 27 Mhz, is on the bottom of the board, which is difficult to measure and shows a similar 25 Mhz waveform.








월드 트레킹 완벽 가이드 . 유럽편 출간

해외 여행 및 트레킹 2018. 3. 5. 08:21
728x90



2월 27일 날 출간 되었습니다.


교보문고, 알라딘  등 주요 서점에서 구입 및  주문 가능 



교보문고 바로가기 


알라딘   바로가기 



----------------