Circuit breaker와 fuse의 음질 차이

audio 와 Home theater 2017. 9. 9. 20:15
728x90

많은 분들이 인터 케이블이나 파워 케이블에 대해서 관심도 많고 또 수백만원짜리까지도

있는 반면 간과하는 부분이 휴즈입니다.

 

휴즈는 기기 보호를 위해 반드시 들어가야 하는 필수 부품인데 이것을 보시면 알겠지만 머리카락 보다 더 가는 구조로 되어 있습니다. 정격 전류 이상 흐르면 녹아 끊어지는 것이 역활이어서 아주 가느다랗게 쉽게 끊어질 수 밖에 없는 구조로 되어 있지요.

 

이 부분이 오디오 쪽에 있어 가장 맹점입니다. 수백만원 짜리 파워 케이블을 붙여서 어린애 팔뚝만한 케이블이 달려 있어도 기기 내부에 들어오면 이 휴즈를 통과 해야 합니다.

 

마치 36 차선 고속도로를 달려 오던 차가 좁디 좁은 골목길을 빠져 나가야 하는 것에 비유할 수도 있을 겁니다.

 

이를 위해 오디오용 휴즈가 비싼 값에 팔리고 있습니다. 금도금 휴즈, 극저온 처리 휴즈 등 사용해 보면 확실히 일반 휴즈 보다는 더 좋은 소리를 냅니다.

 

 

그런데 여기에 서킷 브레이커를 사용하면 확실한 효과가 있습니다.

Circuit breaker는 넓은 금속 재질의 판이 평시에는 접촉하고 있어 전기의 전도성이 휴즈와는 차원이 다르게 좋습니다. 이상시는 이것을 순간적으로 차단합니다.

 

차단 효과는 휴즈에 뒤지지 않을 정도로 빨라 기기 보호에 걱정이 없습니다.

 

과거에는 가정에서 두꺼비집 대신 사용하는 대용량이 일반적이었지만 몇년전 부터 오디오용으로 사용할 수 있는 1 ~3 A급 도 나와 있습니다. 오포의 리니어 전원부에 채용한 이래 확실한 효과 때문에 저는 저의 모든 오디오 기기에서 휴즈를 제거 하고 브레이커로 바꾸었습니다.

 

그리 비싸지 않은 비용으로 확실한 효과를 볼 수 있습니다.

 

https://www.digikey.kr/product-detail/ko/e-t-a/106-M2-P10-1.8A/302-1010-ND/286131

 

여기에서 구입 가능합니다. 소스기기나 프리 앰프에는 1.8A ~2 A,

파워 앰프에는 3 A급 정도를 사용하십시요.

 

 

 

Many people are interested in interconnection cable and power cable. Those are some times cost more than 1000$.

But most people overlooks the fuse.

 

Fuses are essential components that must be inserted to protect the device. the inside wire of fuse is thinner than the hair. If the current exceeds the rated current, it melts and breaks.

 

This is the biggest blind spot on the audio side. Even if you have a very thick power cable which dost more than 1000$, the electricity must pass through the fuse..

 

It might be like a car that ran on a 36-lane highway, which goes to narrow alleyway.

 

The fuses for audio are sold at high prices. such gold-plated fuses. cryogenic fuses, etc., it definitely makes a better sound than normal fuses.

 

 

However, the use of circuit breakers here has a definite positive effect.

A circuit breaker is made of a wide metal plate, which is in contact with the outside of the city, so electrical conductivity is a way different from fuse. When it is abnormal, it blocks the flow.

 

The cut-off time is fast enough to match the fuse, so you do not have to worry about protecting your device.

 

In the past, it was common to use large amperes for using at home, but from a few years ago there are also 1 to 3 A circuit breaker available for audio use. Since I applied it to the linear power supply of OPPO BDP players, for obvious effect, I removed the fuse from all my audio devices and changed it to a circuit breaker.

 

You can see a positive effect with resonable cost.

 

https://www.digikey.kr/product-detail/en/e-t-a/106-M2-P10-1.8A/302-1010-ND/286131

 

It is available for purchase here. For source devices and pre amplifiers, buy 1.8 A to 2 A circuit breaker.

Use a 3 A class circuit breaker for power amp.